The Rust Programming Language

So how do you decide when you should panic! and when you should return Result? When code panics, there’s no way to recover. You could call panic! for any error situation, whether there’s a possible way to recover or not, but then you’re making the decision on behalf of the code calling your code that a situation is unrecoverable. When you choose to return a Result value, you give the calling code options rather than making the decision for it. The calling code could choose to attempt to recover in a way that’s appropriate for its situation, or it could decide that an Err value in this case is unrecoverable, so it can call panic! and turn your recoverable error into an unrecoverable one. Therefore, returning Result is a good default choice when you’re defining a function that might fail.

In a few situations it’s more appropriate to write code that panics instead of returning a Result, but they are less common. Let’s explore why it’s appropriate to panic in examples, prototype code, and tests; then in situations where you as a human can know a method won’t fail that the compiler can’t reason about; and conclude with some general guidelines on how to decide whether to panic in library code.

When you’re writing an example to illustrate some concept, having robust error handling code in the example as well can make the example less clear. In examples, it’s understood that a call to a method like unwrap that could panic! is meant as a placeholder for the way that you’d want your application to handle errors, which can differ based on what the rest of your code is doing.

Similarly, the unwrap and expect methods are very handy when prototyping, before you’re ready to decide how to handle errors. They leave clear markers in your code for when you’re ready to make your program more robust.

If a method call fails in a test, we’d want the whole test to fail, even if that method isn’t the functionality under test. Because panic! is how a test is marked as a failure, calling unwrap or expect is exactly what should happen.

It would also be appropriate to call unwrap when you have some other logic that ensures the Result will have an Ok value, but the logic isn’t something the compiler understands. You’ll still have a Result value that you need to handle: whatever operation you’re calling still has the possibility of failing in general, even though it’s logically impossible in your particular situation. If you can ensure by manually inspecting the code that you’ll never have an Err variant, it’s perfectly acceptable to call unwrap. Here’s an example:

# #![allow(unused_variables)]
#fn main() {
use std::net::IpAddr;

let home = "127.0.0.1".parse::<IpAddr>().unwrap();
#}

We’re creating an IpAddr instance by parsing a hardcoded string. We can see that 127.0.0.1 is a valid IP address, so it’s acceptable to use unwrap here. However, having a hardcoded, valid string doesn’t change the return type of the parse method: we still get a Result value, and the compiler will still make us handle the Result as if the Err variant is still a possibility because the compiler isn’t smart enough to see that this string is always a valid IP address. If the IP address string came from a user rather than being hardcoded into the program, and therefore did have a possibility of failure, we’d definitely want to handle the Result in a more robust way instead.

It’s advisable to have your code panic! when it’s possible that your code could end up in a bad state. In this context, bad state is when some assumption, guarantee, contract, or invariant has been broken, such as when invalid values, contradictory values, or missing values are passed to your code—plus one or more of the following:

• The bad state is not something that’s expected to happen occasionally.
• Your code after this point needs to rely on not being in this bad state.
• There’s not a good way to encode this information in the types you use.

If someone calls your code and passes in values that don’t make sense, the best choice might be to panic! and alert the person using your library to the bug in their code so they can fix it during development. Similarly, panic! is often appropriate if you’re calling external code that is out of your control, and it returns an invalid state that you have no way of fixing.

When a bad state is reached, but it’s expected to happen no matter how well you write your code, it’s still more appropriate to return a Result rather than making a panic! call. Examples of this include a parser being given malformed data or an HTTP request returning a status that indicates you have hit a rate limit. In these cases, you should indicate that failure is an expected possibility by returning a Result to propagate these bad states upwards so the calling code can decide how to handle the problem. To panic! wouldn’t be the best way to handle these cases.

When your code performs operations on values, your code should verify the values are valid first, and panic! if the values aren’t valid. This is mostly for safety reasons: attempting to operate on invalid data can expose your code to vulnerabilities. This is the main reason the standard library will panic! if you attempt an out-of-bounds memory access: trying to access memory that doesn’t belong to the current data structure is a common security problem. Functions often have contracts: their behavior is only guaranteed if the inputs meet particular requirements. Panicking when the contract is violated makes sense because a contract violation always indicates a caller-side bug, and it’s not a kind of error you want the calling code to have to explicitly handle. In fact, there’s no reasonable way for calling code to recover: the calling programmers need to fix the code. Contracts for a function, especially when a violation will cause a panic, should be explained in the API documentation for the function.

However, having lots of error checks in all of your functions would be verbose and annoying. Fortunately, you can use Rust’s type system (and thus the type checking the compiler does) to do many of the checks for you. If your function has a particular type as a parameter, you can proceed with your code’s logic knowing that the compiler has already ensured you have a valid value. For example, if you have a type rather than an Option, your program expects to have something rather than nothing. Your code then doesn’t have to handle two cases for the Some and None variants: it will only have one case for definitely having a value. Code trying to pass nothing to your function won’t even compile, so your function doesn’t have to check for that case at runtime. Another example is using an unsigned integer type like u32, which ensures the parameter is never negative.

Let’s take the idea of using Rust’s type system to ensure we have a valid value one step further and look at creating a custom type for validation. Recall the guessing game in Chapter 2 where our code asked the user to guess a number between 1 and 100. We never validated that the user’s guess was between those numbers before checking it against our secret number; we only validated that the guess was positive. In this case, the consequences were not very dire: our output of “Too high” or “Too low” would still be correct. It would be a useful enhancement to guide the user toward valid guesses and have different behavior when a user guesses a number that’s out of range versus when a user types, for example, letters instead.

One way to do this would be to parse the guess as an i32 instead of only a u32 to allow potentially negative numbers, and then add a check for the number being in range, like so:

loop {
    // snip

    let guess: i32 = match guess.trim().parse() {
        Ok(num) => num,
        Err(_) => continue,
    };

    if guess < 1 || guess > 100 {
        println!("The secret number will be between 1 and 100.");
        continue;
    }

    match guess.cmp(&secret_number) {
    // snip
}

The if expression checks whether our value is out of range, tells the user about the problem, and calls continue to start the next iteration of the loop and ask for another guess. After the if expression, we can proceed with the comparisons between guess and the secret number knowing that guess is between 1 and 100.

However, this is not an ideal solution: if it was absolutely critical that the program only operated on values between 1 and 100, and it had many functions with this requirement, it would be tedious (and potentially impact performance) to have a check like this in every function.

Instead, we can make a new type and put the validations in a function to create an instance of the type rather than repeating the validations everywhere. That way, it’s safe for functions to use the new type in their signatures and confidently use the values they receive. Listing 9-9 shows one way to define a Guess type that will only create an instance of Guess if the new function receives a value between 1 and 100:

# #![allow(unused_variables)]
#fn main() {
pub struct Guess {
    value: u32,
}

impl Guess {
    pub fn new(value: u32) -> Guess {
        if value < 1 || value > 100 {
            panic!("Guess value must be between 1 and 100, got {}.", value);
        }

        Guess {
            value
        }
    }

    pub fn value(&self) -> u32 {
        self.value
    }
}
#}

Listing 9-9: A Guess type that will only continue with values between 1 and 100

First, we define a struct named Guess that has a field named value that holds a u32. This is where the number will be stored.

Then we implement an associated function named new on Guess that creates instances of Guess values. The new function is defined to have one parameter named value of type u32 and to return a Guess. The code in the body of the new function tests value to make sure it’s between 1 and 100. If value doesn’t pass this test, we make a panic! call, which will alert the programmer who is writing the calling code that they have a bug they need to fix, because creating a Guess with a value outside this range would violate the contract that Guess::new is relying on. The conditions in which Guess::new might panic should be discussed in its public-facing API documentation; we’ll cover documentation conventions indicating the possibility of a panic! in the API documentation that you create in Chapter 14. If value does pass the test, we create a new Guess with its value field set to the value parameter and return the Guess.

Next, we implement a method named value that borrows self, doesn’t have any other parameters, and returns a u32. This is a kind of method sometimes called a getter, because its purpose is to get some data from its fields and return it. This public method is necessary because the value field of the Guess struct is private. It’s important that the value field is private so code using the Guess struct is not allowed to set value directly: code outside the module must use the Guess::new function to create an instance of Guess, which ensures there’s no way for a Guess to have a value that hasn’t been checked by the conditions in the Guess::new function.

A function that has a parameter or returns only numbers between 1 and 100 could then declare in its signature that it takes or returns a Guess rather than a u32 and wouldn’t need to do any additional checks in its body.

Rust’s error handling features are designed to help you write more robust code. The panic! macro signals that your program is in a state it can’t handle and lets you tell the process to stop instead of trying to proceed with invalid or incorrect values. The Result enum uses Rust’s type system to indicate that operations might fail in a way that your code could recover from. You can use Result to tell code that calls your code that it needs to handle potential success or failure as well. Using panic! and Result in the appropriate situations will make your code more reliable in the face of inevitable problems.

Now that you’ve seen useful ways that the standard library uses generics with the Option and Result enums, we’ll talk about how generics work and how you can use them in your code in the next chapter.