The Rust Programming Language

To understand when we might want to use structs, let’s write a program that calculates the area of a rectangle. We’ll start with single variables, and then refactor the program until we’re using structs instead.

Let’s make a new binary project with Cargo called rectangles that will take the width and height of a rectangle specified in pixels and will calculate the area of the rectangle. Listing 5-8 shows a short program with one way of doing just that in our project’s src/main.rs:

Filename: src/main.rs

fn main() {
    let width1 = 30;
    let height1 = 50;

    println!(
        "The area of the rectangle is {} square pixels.",
        area(width1, height1)
    );
}

fn area(width: u32, height: u32) -> u32 {
    width * height
}

Listing 5-8: Calculating the area of a rectangle specified by its width and height in separate variables

Now, run this program using cargo run:

The area of the rectangle is 1500 square pixels.

Even though Listing 5-8 works and figures out the area of the rectangle by calling the area function with each dimension, we can do better. The width and the height are related to each other because together they describe one rectangle.

The issue with this method is evident in the signature of area:

fn area(width: u32, height: u32) -> u32 {

The area function is supposed to calculate the area of one rectangle, but the function we wrote has two parameters. The parameters are related, but that’s not expressed anywhere in our program. It would be more readable and more manageable to group width and height together. We’ve already discussed one way we might do that in the Grouping Values into Tuples section of Chapter 3 on page XX: by using tuples. Listing 5-9 shows another version of our program that uses tuples:

Filename: src/main.rs

fn main() {
    let rect1 = (30, 50);

    println!(
        "The area of the rectangle is {} square pixels.",
        area(rect1)
    );
}

fn area(dimensions: (u32, u32)) -> u32 {
    dimensions.0 * dimensions.1
}

Listing 5-8: Specifying the width and height of the rectangle with a tuple

In one way, this program is better. Tuples let us add a bit of structure, and we’re now passing just one argument. But in another way this version is less clear: tuples don’t name their elements, so our calculation has become more confusing because we have to index into the parts of the tuple.

It doesn’t matter if we mix up width and height for the area calculation, but if we want to draw the rectangle on the screen, it would matter! We would have to keep in mind that width is the tuple index 0 and height is the tuple index 1. If someone else worked on this code, they would have to figure this out and keep it in mind as well. It would be easy to forget or mix up these values and cause errors, because we haven’t conveyed the meaning of our data in our code.

We use structs to add meaning by labeling the data. We can transform the tuple we’re using into a data type with a name for the whole as well as names for the parts, as shown in Listing 5-10:

Filename: src/main.rs

struct Rectangle {
    width: u32,
    height: u32,
}

fn main() {
    let rect1 = Rectangle { width: 30, height: 50 };

    println!(
        "The area of the rectangle is {} square pixels.",
        area(&rect1)
    );
}

fn area(rectangle: &Rectangle) -> u32 {
    rectangle.width * rectangle.height
}

Listing 5-10: Defining a Rectangle struct

Here we’ve defined a struct and named it Rectangle. Inside the {} we defined the fields as width and height, both of which have type u32. Then in main we create a particular instance of a Rectangle that has a width of 30 and a height of 50.

Our area function is now defined with one parameter, which we’ve named rectangle, whose type is an immutable borrow of a struct Rectangle instance. As mentioned in Chapter 4, we want to borrow the struct rather than take ownership of it. This way, main retains its ownership and can continue using rect1, which is the reason we use the & in the function signature and where we call the function.

The area function accesses the width and height fields of the Rectangle instance. Our function signature for area now indicates exactly what we mean: calculate the area of a Rectangle using its width and height fields. This conveys that the width and height are related to each other, and gives descriptive names to the values rather than using the tuple index values of 0 and 1—a win for clarity.

It would be helpful to be able to print out an instance of the Rectangle while we’re debugging our program in order to see the values for all its fields. Listing 5-11 uses the println! macro as we have been in earlier chapters:

Filename: src/main.rs

struct Rectangle {
    width: u32,
    height: u32,
}

fn main() {
    let rect1 = Rectangle { width: 30, height: 50 };

    println!("rect1 is {}", rect1);
}

Listing 5-11: Attempting to print a Rectangle instance

When we run this code, we get an error with this core message:

error[E0277]: the trait bound `Rectangle: std::fmt::Display` is not satisfied

The println! macro can do many kinds of formatting, and by default, {} tells println! to use formatting known as Display: output intended for direct end user consumption. The primitive types we’ve seen so far implement Display by default, because there’s only one way you’d want to show a 1 or any other primitive type to a user. But with structs, the way println! should format the output is less clear because there are more display possibilities: do you want commas or not? Do you want to print the curly braces? Should all the fields be shown? Due to this ambiguity, Rust doesn’t try to guess what we want and structs don’t have a provided implementation of Display.

If we continue reading the errors, we’ll find this helpful note:

note: `Rectangle` cannot be formatted with the default formatter; try using
`:?` instead if you are using a format string

Let’s try it! The println! macro call will now look like println!("rect1 is {:?}", rect1);. Putting the specifier :? inside the {} tells println! we want to use an output format called Debug. Debug is a trait that enables us to print out our struct in a way that is useful for developers so we can see its value while we’re debugging our code.

Run the code with this change. Drat! We still get an error:

error: the trait bound `Rectangle: std::fmt::Debug` is not satisfied

But again, the compiler gives us a helpful note:

note: `Rectangle` cannot be formatted using `:?`; if it is defined in your
crate, add `#[derive(Debug)]` or manually implement it

Rust does include functionality to print out debugging information, but we have to explicitly opt-in to make that functionality available for our struct. To do that, we add the annotation #[derive(Debug)] just before the struct definition, as shown in Listing 5-12:

Filename: src/main.rs

#[derive(Debug)]
struct Rectangle {
    width: u32,
    height: u32,
}

fn main() {
    let rect1 = Rectangle { width: 30, height: 50 };

    println!("rect1 is {:?}", rect1);
}

Listing 5-12: Adding the annotation to derive the Debug trait and printing the Rectangle instance using debug formatting

Now when we run the program, we won’t get any errors and we’ll see the following output:

rect1 is Rectangle { width: 30, height: 50 }

Nice! It’s not the prettiest output, but it shows the values of all the fields for this instance, which would definitely help during debugging. When we have larger structs, it’s useful to have output that’s a bit easier to read; in those cases, we can use {:#?} instead of {:?} in the println! string. When we use the {:#?} style in the example, the output will look like this:

rect1 is Rectangle {
    width: 30,
    height: 50
}

Rust has provided a number of traits for us to use with the derive annotation that can add useful behavior to our custom types. Those traits and their behaviors are listed in Appendix C. We’ll cover how to implement these traits with custom behavior as well as how to create your own traits in Chapter 10.

Our area function is very specific: it only computes the area of rectangles. It would be helpful to tie this behavior more closely to our Rectangle struct, because it won’t work with any other type. Let’s look at how we can continue to refactor this code by turning the area function into an area method defined on our Rectangle type.